Share This
table started by
Freebase Web Team for the Tall ships Base
There is no user-contributed description yet.
Add More Topics
Save this view to a base, or just for yourself.
42 Part of a tall ship topics matching:
Filter this Collection| x name | x image | x article |
|---|---|---|
| x Course |
In sailing, a course sail is the principal sail on a mast.
This term is used predominantly on square rigged vessels, referring to the largest and lowest sail on each mast (mizzen-course, main-course and fore-course). Gaff-rigged vessels might...
|
|
| x Mast |
|
The mast of a sailing ship is a tall, vertical, or near vertical, spar, or arrangement of spars, which supports the sails. Large ships have several masts, with the size and configuration depending on the style of ship.
Until the 20th century, ships'...
|
| x Staysail |
A staysail is a fore-and-aft rigged sail whose luff can be affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit or to another mast.
Most staysails are triangular, however some are four...
|
|
| x Rigging |
|
Rigging (from Anglo-Saxon wrigan or wringing, "to clothe") is the apparatus through which the force of the wind is used to propel sailboats and sailing ships forward. This includes masts, yardarms, sails, and cordage.
Rigging is the mechanical...
|
| x Sail |
|
A sail is any type of surface intended to generate thrust by being placed in a wind—in essence a vertically-oriented wing. Sails are used in sailing.
The ships built at around 10,000 BC were just crude log rafts or dug-out canoes. The earliest known...
|
| x Jib |
|
A jib (also spelled jibb) is a triangular staysail set ahead of the foremast of a sailing boat. Its tack is fixed to the bowsprit, to the bow, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of...
|
| x Futtock shrouds |
|
Futtock shrouds are rope, wire or chain links in the rigging of a traditional square rigged ship. They run from the outer edges of a top downwards and inwards to a point on the mast or lower shrouds, and carry the load of the shrouds that rise from...
|
| x Shroud |
|
On a sailboat, the shrouds are pieces of standing rigging which hold the mast up from side to side. There is frequently more than one shroud on each side of the boat. Usually a shroud will connect at the top of the mast, and additional shrouds might...
|
| x Top |
|
On a traditional square rigged ship, the top is the platform at the upper end of each (lower) mast. This is not the masthead "crow's nest" of the popular imagination - above the mainmast (for example) is the main-topmast, main-topgallant-mast and...
|
| x Jacob's ladder |
|
The term Jacob's ladder, used on a ship, applies to two kinds of ladder.
The first is a flexible hanging ladder which can be lowered down the side of a large ship. It consists of vertical ropes or chains supporting horizontal wooden or metal rungs,...
|
| x Deck |
A deck is a permanent covering over a compartment or a hull of a ship. On a boat or ship, the primary deck is the horizontal structure which forms the 'roof' for the hull, which both strengthens the hull and serves as the primary working surface....
|
|
| x Forecastle |
|
Forecastle refers to the upper deck of a sailing ship forward of the foremast.
The syncope of the word, fo'c'sle (pronounced /ˈfoʊksəl/), is common among nautical terms due to the nature of their pronunciation during the age of sail by sailors with...
|
| x Martingale |
A nautical martingale comprises the parts of standing rigging which strengthen the bowsprit and jib boom against the force of the head stays.
|
|
| x Bowsprit |
|
The bowsprit, or boltsprit, of a sailing vessel is a pole extending forward from the vessel's prow. It provides an anchor point for the forestay(s), allowing the fore-mast to be stepped farther forward on the hull.
On large tall ships the bowsprit...
|
| x Standing rigging |
On a sailing boat, standing rigging generally refers to lines, wires, or rods which are more or less fixed in position while the boat is under sail. This term is used in contrast to running rigging, which represents elements of rigging which move...
|
|
| x Forestay |
|
On a sailing vessel, a forestay, sometimes just called a stay, is a piece of standing rigging which keeps a mast from falling backwards. It is attached either at the very top of the mast, or in fractional rigs between about 1/8 and 1/4 from the top...
|
| x Hull |
|
A hull is the watertight body of a ship or boat. Above the hull comes the superstructure and deckhouse. The line where the hull meets the water surface is called the waterline.
The structure of the hull varies depending on the vessel type. In a...
|
| x Figurehead |
|
A figurehead is a carved wooden decoration, often female or bestial, found at the prow of ships largely made between the 16th and 19th century.
Although earlier ships had often had some form of bow ornamentation (e.g. the Viking ships of ca. A.D....
|
| x Bow |
|
The bow (pronounced /ˈbaʊ/, rhymes with how) is a nautical term that refers to the forward part of the hull of a ship or boat, the point that is most forward when the vessel is underway. Both of the adjectives fore and forward mean towards the bow....
|
| x Bilge |
|
The bilge is the lowest compartment on a ship where the two sides meet. The word was first coined in 1523.
The word is sometimes also used to describe the water that collects in this compartment. Water that does not drain off the side of the deck...
|
| x Hawser |
Hawser is a nautical term for a thick cable or rope used in mooring or towing a ship. A hawser passes through a hawsehole or cat hole, located on the hawse.
|
|
| x Keel |
|
In boats and ships, keel can refer to either of two parts: a structural element, or a hydrodynamic element. These parts overlap. As the laying down of the keel is the initial step in construction of a ship, the construction is dated from this event,...
|
| x Quarter gallery |
|
A quarter gallery is an architectural feature of the stern of a sailing ship from around the 16th to the 19th century. Quarter galleries are a kind of balconies, typically placed on the sides of the sterncastle, the high, tower-like structure at the...
|
| x Gunwale |
The gunwale (pronounced /ˈɡʌnəl/ "gunnel" to rhyme with "tunnel") is a nautical term describing the top edge of the side of a boat.
Wale is the same word as the skin injury, a weal, which, too, forms a ridge. Originally the gunwale was the "Gun...
|
|
| x Tiller |
|
A tiller or till is a lever attached to a rudder post (American terminology) or rudder stock (English terminology) of a boat that provides leverage for the helmsman to turn the rudder. The tiller is normally used by the helmsman directly pulling or...
|
| x Beitass |
A Beitass, or stretching pole, is a wooden spar used on Viking ships that was fitted into a pocket at the lower corner of the sail. This innovation was used to stiffen and hold the edge of the sail when sailing close to the wind.
|
|
| x Beakhead |
|
A beakhead is the protruding part of the foremost section of a sailing ship. It was fitted on sailing vessels from the 16th to the 18th century and served as a working platform by sailors working the sails of the bowsprit, the forward-pointing mast...
|
| x Bulb keel |
|
A bulb keel is a keel, usually made with a high aspect ratio foil, that contains a ballast-filled bulb at the bottom, usually teardrop shaped. The purpose of the bulb keel is to place the ballast as low as possible, therefore gaining the maximum...
|
| x Hawsehole |
Hawsehole is a nautical term for a small hole in the hull of a ship through which hawsers may be passed. Also known as a cat hole. In the British Navy, an officer who had served as a seaman before being promoted was said to have "come in through the...
|
|
| x Bilgeboard |
A bilgeboard is a lifting foil used in a sailboat, which resembles a cross between a centerboard and a leeboard. Bilgeboards are mounted between the centerline of the boat and the sides, and are almost always asymmetric foils mounted at an angle to...
|
|
| x Butt |
In shipbuilding, a butt is the joint between two planks on the outside of a ship, under water. Hence, when a plank is loose at one end, sailors called it springing a butt; to prevent which, ships were usually bolted at the butt-heads, that is, at...
|
|
| x Stern |
|
The stern is the rear or aft part of a ship or boat, technically defined as the area built up over the sternpost, extending upwards from the counter to the taffrail. The stern lies opposite of the bow, the foremost part of a ship.
The stern area is...
|
| x Jackline |
|
A jackline is a rope or wire strung from a ship's bow to stern to which a safety harness can be clipped, allowing a crewmember to move about the deck safely when there is risk of falling or being swept overboard. At sea, falling overboard is one of...
|
| x Spinnaker |
|
A spinnaker is a special type of sail that is designed specifically for sailing off the wind from a reaching course to a downwind, i.e. with the wind 90°–180° off the bow. The spinnaker fills with wind and balloons out in front of the boat when it...
|
| x Rudder |
|
A rudder is a device used to steer a ship, boat, submarine, hovercraft, aircraft,or other conveyance that moves through a fluid (generally air or water). On an aircraft the rudder is used primarily to counter adverse yaw and p-factor and is not the...
|
| x Daggerboard |
|
A daggerboard is a retractable keel used by various sailing craft. While other types of centreboard may pivot to retract, a daggerboard slides in a casing. The shape of the daggerboard converts the forward motion into a windward lift, countering the...
|
| x Centreboard |
A centerboard is a retractable keel which pivots out of a slot in the hull of a sailboat, known as a centerboard trunk (US) or case. The pivoting ability allows the centerboard to be raised to operate in shallow waters, to move the center of lateral...
|
|
| x Ship's wheel |
|
The wheel of a ship is the modern method of adjusting the angle of the rudder, in turn changing the direction of the boat or ship. It is also called the helm, together with the rest of the steering mechanism.
Helmsmen on older ships steer used a...
|
| x Afterdeck |
An afterdeck is the part of a ship's deck amidships toward the stern. Context Sentence: The sailor was posted near the stearn of the ship
|
|
| x Steering oar |
The steering oar or steering board is an oversized oar or board to control the direction of a ship or other watercraft prior to the invention of the rudder.
It is normally attached to the starboard side in larger vessels, though in smaller ones it...
|
|
| x Boom vang |
|
A boom vang (US) or kicking strap (UK) is a line or piston system on a sailboat used to exert downward force on the boom and thus control the shape of the sail. An older term is "martingale".
The vang typically runs from the base of the mast to a...
|
| x Carling |
In shipbuilding, carlings are two pieces of timber laid fore and aft under the deck of a ship, from one beam to another, directly over the keel. They serve as a foundation for the whole body of the ship; on these the ledges rest, whereon the planks...
|
|
