Burlington Northern Railroad Bridge 9.6

Burlington Northern Railroad Bridge 9.6 is BNSF Railway's bridge across the Columbia River, between Portland, Oregon, and Vancouver, Washington. The bridge has a swing span, which pivots on its base to allow for the passage of larger ships. The bridge carries 2 railroad tracks, which are used by BNSF, Union Pacific, and Amtrak. In 1905, Spokane, Portland and Seattle Railway (SP&S;), in cooperation with Great Northern Railway (GN), proposed a cros... more

Bridge

Body Of Water Spanned:

Bridge Type:

Locale:

top ↑

We can also tell you Burlington Northern Railroad Bridge 9.6 is a…

If you know more about Burlington Northern Railroad Bridge 9.6, you can add more facts here »

Similar topics in Freebase

  • Steel Bridge

    Steel Bridge

    The Steel Bridge is a through truss, double lift bridge across the Willamette River in Portland, Oregon, United States. Its lower deck carries railroad and bicycle/pedestrian traffic, while the upper deck carries road traffic (on the Pacific Highway West No. 1W, former Oregon Route 99W) and light...
  • Glenn L. Jackson Memorial Bridge

    Glenn L. Jackson Memorial Bridge

    The Glenn L. Jackson Memorial Bridge, or I-205 bridge, is a segmental bridge that spans the Columbia River between Vancouver, Washington and Portland, Oregon. Planning for the structure began in earnest in 1964 when it was designated as part of the East Portland Freeway (later renamed Veteran's...
  • Morrison Bridge

    Morrison Bridge

    The Morrison Bridge is a bascule bridge that spans the Willamette River in Portland, Oregon. The original Morrison bridge was a wooden truss swing span bridge completed on April 12, 1887 as the first Willamette River bridge in Portland and the longest bridge west of the Mississippi River. It was...
  • Astoria-Megler Bridge

    Astoria-Megler Bridge

    The Astoria-Megler Bridge is a continuous truss bridge that spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington, in the United States. The span was the last segment of U.S. Route 101 between Olympia, Washington and Los Angeles, California. It is...
  • Burnside Bridge

    Burnside Bridge

    The Burnside Bridge is a bascule bridge that spans the Willamette River in Portland, Oregon. Including approaches, the Burnside has a total length of 2,308 ft (703 m) and a 251 ft (76.5 m) center span. While lowered this span is normally 64 ft (20 m) above the river. The deck is made of concrete,...
  • Cable Bridge

    Cable Bridge

    The Cable Bridge, officially called the Ed Hendler Bridge and sometimes called the Intercity Bridge, spans the Columbia River between Pasco and Kennewick in southeastern Washington as State Route 397. It was constructed in 1978 and replaced the Pasco-Kennewick Bridge, an earlier span built in 1922...
  • Bridge of the Gods

    Bridge of the Gods

    The Bridge of the Gods is a steel truss cantilever bridge that spans the Columbia River between Cascade Locks, Oregon and Washington state near Stevenson. It is approximately 40 miles (64 kilometers) east of Portland, Oregon and 4 miles (6.4 km) upriver from the Bonneville Dam. It currently serves...
  • Umatilla Bridge

    Umatilla Bridge

    The Umatilla Bridge is the collective name for a pair of bridges carrying Interstate 82/U.S. Route 395 across the Columbia River at the Washington State/Oregon border. The older bridge is a steel through truss cantilever bridge and only carries southbound traffic, with northbound traffic going on...
  • Interstate Bridge

    Interstate Bridge

    The Interstate Bridge (also Columbia River Interstate Bridge, I-5 Bridge, Portland-Vancouver Interstate Bridge) is a pair of nearly identical steel vertical lift, through truss bridges that carry Interstate 5 traffic over the Columbia River between Vancouver, Washington, and Portland, Oregon, in...
  • Pasco-Kennewick Bridge

    The Pasco-Kennewick Bridge or Benton-Franklin Inter-County Bridge, known locally as the Green Bridge, was a steel cantilever truss bridge crossing the Columbia River in central Washington, connecting the cities of Pasco and Kennewick. After it was replaced by the Cable Bridge in 1978, the bridge...

You can help improve this topic by adding more facts here

Edit this topic
Edit and Show details

Add or delete facts, download data in JSON or RDF formats, and explore topic metadata.

Freebase Logo
What is Freebase?

Freebase is a huge collection of facts, built by people like you. Freebase connects facts in ways other sites can't, giving you new ways to explore millions of subjects.
You can help improve it!

Freebase Attribution

Freebase data is free for use under the CC-BY license.

The original description for Burlington Northern Railroad Bridge 9.6 was automatically generated from Wikipedia.org licensed under the GNU Free Documentation License.
[1]
Learn more about Freebase licensing and attribution