GWR 7200 Class

We can tell you that GWR 7200 Class is a…

• …Locomotive class

If you know more about GWR 7200 Class, you can add more facts here »

Similar topics in Freebase

• 

  GWR 1361 Class

  The 1361 Class were small 0-6-0ST steam locomotives built by the Great Western Railway at their Swindon railway works, England, mainly for shunting in docks and other sidings where track curvature was too tight for large locomotives. The 1361 Class were designed by Harold Holcroft, the Great...
• 

  GWR 1101 Class

  The GWR 1101 Class was a class of 0-4-0T side tank steam locomotives built by the Avonside Engine Company to the order of the Great Western Railway in 1926 for dock shunting. They passed into British Railways ownership in 1948 and were numbered 1101–1106. All were withdrawn in 1959–1960 and none is...
• 

  GNR Class J13

  The Great Northern Railway (GNR) Class J13, classified J52 by the LNER is a class of 0-6-0ST steam locomotive intended primarily for shunting. The Class J13 were introduced in 1897 designed by Henry Ivatt based on the earlier domeless GNR Class J14 (LNER Class J53). Eighty-five J13s were built up...
• 

  GNR Class N2

  The Great Northern Railway (GNR) Class N2 is an 0-6-2T side tank steam locomotive designed by Nigel Gresley and introduced in 1920. Further batches were built by the London and North Eastern Railway from 1925. They had superheaters and piston valves driven by Stephenson valve gear. Some locomotives...
• 

  GER Class C53

  The GER Class C53 was a class of twelve 0-6-0T steam tram locomotives designed by James Holden for the Great Eastern Railway. They passed to the London and North Eastern Railway at the grouping, and received the LNER classification J70. These locomotives had 12-by-15-inch (305 × 381 mm) outside...
• 

  GER Class 527

  The GER Class 527 was a class of fifteen 2-6-0 steam tender locomotives designed by William Adams for the Great Eastern Railway. This was the last design that Adams prepared for the GER, although they did not enter service until his successor Massey Bromley had taken office and incorporated some...

• LNER Class K5

  The London and North Eastern Railway Class K5 consisted of a single rebuild of LNER Class K3 2-6-0 No. 206 (later No. 61863), rebuilt in 1945 by Edward Thompson. The rebuilt locomotive had a new boiler and two, instead of three, cylinders following earlier rebuilds of other Gresley designs. The...

• GWR Prince Class

  The Great Western Railway Prince Class 2-2-2 broad gauge steam locomotives for passenger train work. This class was introduced into service between August 1846 and March 1847, and withdrawn between January and September 1870. From about 1865, the Prince Class locomotives became part of the Priam...

• GWR 388 class

  The GWR 388 class was a large class of 310 0-6-0 goods locomotives built by the Great Western Railway. They are sometimes referred to as the Armstrong Goods or Armstrong Standard Goods to differentiate from the Gooch Goods and Dean Goods classes, both of which were also large classes of standard...

• GWR Pyracmon Class

  The Great Western Railway Pyracmon Class 0-6-0 broad gauge steam locomotives for goods train work. This class was introduced into service between November 1847 and April 1848, and withdrawn between August 1871 and December 1873. Bacchus was added to the class in May 1849 (and withdrawn in November...