Mechanical overload

We can tell you that Mechanical overload is a…

• …Accident type

If you know more about Mechanical overload, you can add more facts here »

Similar topics in Freebase

• 

  Fracture

  A fracture is the (local) separation of an object or material into two, or more, pieces under the action of stress. The word fracture is often applied to bones of living creatures, or to crystals or crystalline materials, such as gemstones or metal. Sometimes, in crystalline materials, individual...
• 

  Fatigue

  In materials science, fatigue is the progressive and localized structural damage that occurs when a material is subjected to cyclic loading. The maximum stress values are less than the ultimate tensile stress limit, and may be below the yield stress limit of the material. ASTM defines fatigue life,...
• 

  Fire

  Fire is the rapid oxidation of a combustible material releasing heat, light, and various reaction products such as carbon dioxide and water. If hot enough, the gases may become ionized to produce plasma. Depending on the substances alight, and any impurities outside, the color of the flame and the...
• 

  Train wreck

  A train wreck is a type of disaster involving one or more trains. Train wrecks often occur as a result of miscommunication, as when a moving train meets another train on the same track; or an accident, such as when a train wheel jumps off a track in a derailment; or when a boiler explosion occurs....
• 

  Creep

  Creep is the tendency of a solid material to slowly move or deform permanently under the influence of stresses. It occurs as a result of long term exposure to levels of stress that are below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long...
• 

  Corrosion

  Corrosion is the disintegration of a material into its constituent atoms due to chemical reactions with its surroundings. In the most common use of the word, this means a loss of electrons of metals reacting with water and oxygen. Weakening of iron due to oxidation of the iron atoms is a well-known...
• 

  Buckling

  In engineering, buckling is a failure mode characterized by a sudden failure of a structural member subjected to high compressive stresses, where the actual compressive stress at the point of failure is less than the ultimate compressive stresses that the material is capable of withstanding. This...

• Ship collision

  Ship collision is the structural impact between two ships or one ship and a floating or still object such as an iceberg. Ship collisions are of particular importance in marine accidents. Some reasons for the latter are: As sea routes are getting denser and ship speeds higher, there is a good...

• Wear

  In materials science, wear is the erosion of material from a solid surface by the action of another surface. It is related to surface interactions and more specifically the removal of material from a surface as a result of mechanical action. The need for mechanical action, in the form of contact...

• Thermal shock

  Thermal shock is the name given to cracking as a result of rapid temperature change. Glass and ceramic objects are particularly vulnerable to this form of failure, due to their low toughness, low thermal conductivity, and high thermal expansion coefficients. However, they are used in many high...