As in the case of the Danes the Norwegians' earliest standards of measure can be derived from their ship burials. The 60 ft long Kvalsund boat was built ca. 700 AD and differs from the Danish boats less than it does from the Oseberg, Gokstad and Tune ships which all date from ca. 800 AD. Thwarts are typically spaced about 3 feet apart.
In 1541, an alen in Denmark and Norway was defined by law to be the Sjælland alen. Subsequently, the alen was d...
more
Read article at Wikipedia
Norwegian units of measurement
Similar topics in Freebase
-
English unit
English units refers to the historical units of measurement in medieval England, which evolved as a combination of the Anglo-Saxon and Roman systems of units. They were redefined in England in 1824 by a Weights and Measures Act, which retained many but not all of the unit names with slightly... -
US customary units
The United States customary system (also called American system or, more rarely, "English units") is the most commonly used system of measurement in the United States. It is similar but not identical to the British Imperial units. The U.S. is the only industrialized nation that does not mainly use... -
Imperial unit system
Imperial units or the imperial system is a system of units, first defined in the British Weights and Measures Act of 1824, later refined (until 1959) and reduced. The system came into official use across the British Empire. By the late 20th century all nations of the former empire had officially... -
Swedish units of measurement
In Sweden, a common system for weights and measures was introduced by law in 1665. Before that, there were a number of local variants. The system was slightly revised in 1735. In 1855, a decimal reform was instituted that defined a new Swedish inch as 1/10 foot. Up to the middle of the 19th century... -
Finnish units of measurement
In Finland, approximate units of measure were derived from natural actions or objects such body parts, later standardised for the purpose of commerce. Some Swedish and, later, Russian, units were also used. The measurements were first standardized by law in 1665 and were revised in 1735. Before... -
Obsolete Tatar units of measurement
A native system of weights and measures was used by Tatars until 1924, but became obsolete when the Soviet Union adopted the metric system. The Tatar system shares many units with the Russian system (e.g. sajın and disätinä), which is close to the English (The Russian system existed since ancient... -
Obsolete Spanish and Portuguese units of measurement
There are a number of Spanish and Portuguese units of measurement of length or area that are now virtually obsolete. They include the vara, the cordel, the league and the labor. The units of area used to express the area of land are still encountered in some transactions in land today. For example,... -
German units of measurement
Germany had an indigenous system of German units of measurement prior to its adoption of the international metric system. These units are now mainly of historical interest. Before the introduction of the metric system in German, almost every town had its own definitions of the units shown below,... -
Obsolete Russian units of measurement
A native system of weights and measures was used in Imperial Russia and after the Russian Revolution, but it was abandoned in 1924 when the Soviet Union adopted the metric system. The Tatar system is very similar to the Russian one, but some names are different. The system existed since ancient Rus... -
Danish units of measurement
The Danes started with a system of units based on a Greek pous ("foot") of 308.4 mm (1.012 ft) which they picked up through trade in the late Bronze Age/early Iron Age. Some early standards of measure can be recovered from measured drawings made of the 52.5-foot long Hjortspring boat which though...