Pilot error

Similar topics in Freebase

• 

  Fire

  Fire is the rapid oxidation of a material in the exothermic chemical process of combustion, releasing heat, light, and various reaction products. Slower oxidative processes like rusting or digestion are not included by this definition. The flame is the visible portion of the fire. If hot enough,...
• 

  Bomb

  A bomb is any of a range (short or long distance) of explosive weapons that only rely on the exothermic reaction of an explosive material to provide an extremely sudden and violent release of energy (an explosive device). Detonations inflict damage principally through ground- and atmosphere...
• 

  Wind shear

  Wind shear, sometimes referred to as windshear or wind gradient, is a difference in wind speed and direction over a relatively short distance in the atmosphere. Wind shear can be broken down into vertical and horizontal components, with horizontal wind shear seen across fronts and near the coast,...
• 

  Landing

  Landing is the last part of a flight, where a flying animal, aircraft, or spacecraft returns to the ground. When the flying object returns to water, the process is called alighting, although it is commonly called "landing," "touchdown" or "splashdown" as well. A normal aircraft flight would include...
• 

  Improvised bombing

  An improvised explosive device (IED), also known as a roadside bomb, is a homemade bomb constructed and deployed in ways other than in conventional military action. It may be constructed of conventional military explosives, such as an artillery round, attached to a detonating mechanism. IEDs may be...
• 

  R101

  R101 was one of a pair of British rigid airships completed in 1929 as part of a British government programme to develop civil airships capable of service on long-distance routes within the British Empire. It was designed and built by an Air Ministry-appointed team and was effectively in competition...
• 

  Fatigue

  In materials science, fatigue is the progressive and localized structural damage that occurs when a material is subjected to cyclic loading. The nominal maximum stress values are less than the ultimate tensile stress limit, and may be below the yield stress limit of the material. Fatigue occurs...
• 

  Controlled flight into terrain

  Controlled flight into terrain (CFIT) describes an accident in which an airworthy aircraft, under pilot control, is unintentionally flown into the ground, a mountain, water, or an obstacle. The term was coined by engineers at Boeing in the late 1970s. The pilots are generally unaware of the danger...
• 

  Uncontrolled decompression

  Uncontrolled decompression refers to an unplanned drop in the pressure of a sealed system, such as an aircraft cabin, and typically results from human error, material fatigue, engineering failure, or impact, causing a pressure vessel to vent into its lower-pressure surroundings or fail to...
• 

  Bird strike

  A bird strike—sometimes called birdstrike, avian ingestion (only if in an engine), bird hit, or BASH (for Bird Aircraft Strike Hazard)—is a collision between an airborne animal (usually a bird or bat) and a man-made vehicle, especially aircraft. The term is also used for bird deaths resulting from...