The Routing Information Protocol (RIP) is a distance-vector routing protocol, which employs the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for RIP is 15. This hop limit, however, also limits the size of networks that RIP can support. A hop count of 16 is considered an infinite distance and used to dep...
More
Read article at Wikipedia
Routing Information Protocol
We can tell you that Routing Information Protocol is a
If you know more about Routing Information Protocol, you can add more facts here »
Similar topics in Freebase
-
Dynamic Host Configuration Protocol
The Dynamic Host Configuration Protocol (DHCP) is a network configuration protocol for hosts on Internet Protocol (IP) networks. Computers that are connected to IP networks must be configured before they can communicate with other hosts. The most essential information needed is an IP address, and a... -
IEEE 802.11
IEEE 802.11 is a set of standards for implementing wireless local area network (WLAN) computer communication in the 2.4, 3.6 and 5 GHz frequency bands. They are created and maintained by the IEEE LAN/MAN Standards Committee (IEEE 802). The base version of the standard IEEE 802.11-2007 has had... -
Gnutella
Gnutella ( /nʌˈtɛlə/ with a silent g, but often /ɡnʌˈtɛlə/) is a large peer-to-peer network which, at the time of its creation, was the first decentralized peer-to-peer network of its kind, leading to other, later networks adopting the model. It celebrated a decade of existence on March 14, 2010... -
X.25
X.25 is an ITU-T standard protocol suite for packet switched wide area network (WAN) communication. An X.25 WAN consists of packet-switching exchange (PSE) nodes as the networking hardware, and leased lines, Plain old telephone service connections or ISDN connections as physical links. X.25 is a... -
StarLAN
StarLAN was the first implementation of 1 megabit per second (1Mb/s) Ethernet over twisted pair wiring. It was standardized by the standards association of the Institute of Electrical and Electronics Engineers (IEEE) as 802.3e in 1986, as the 1BASE5 version of Ethernet. StarLAN was developed by AT... -
E-carrier
In digital telecommunications, where a single physical wire pair can be used to carry many simultaneous voice conversations by time-division multiplexing, worldwide standards have been created and deployed. The European Conference of Postal and Telecommunications Administrations (CEPT) originally... -
Finger protocol
In computer networking, the Name/Finger protocol and the Finger user information protocol are simple network protocols for the exchange of human-oriented status and user information. The Name/Finger protocol, written by David Zimmerman, is based on Request for comments document RFC 742 (December... -
Abstract Syntax Notation One
Abstract Syntax Notation One (ASN.1) is a standard and flexible notation that describes rules and structures for representing, encoding, transmitting, and decoding data in telecommunications and computer networking. The formal rules enable representation of objects that are independent of machine... -
Open Shortest Path First
Open Shortest Path First (OSPF) is an adaptive routing protocol for Internet Protocol (IP) networks. It uses a link state routing algorithm and falls into the group of interior routing protocols, operating within a single autonomous system (AS). It is defined as OSPF Version 2 in RFC 2328 (1998)... -
Server Message Block
In computer networking, Server Message Block (SMB), also known as Common Internet File System (CIFS, /ˈsɪfs/) operates as an application-layer network protocol mainly used for providing shared access to files, printers, serial ports, and miscellaneous communications between nodes on a network. It...