Stone Ribbed Fan Vault
Facts from the Community
From the Engineering base
Structures:
| Structure | element category | Structural (load bearing) material | Facade material |
|---|---|---|---|
Similar topics in Freebase
-
Column
A column or pillar in architecture and structural engineering is an structural element that transmits, through compression, the weight of the structure above to other structural elements below. For the purpose of wind or earthquake engineering, columns may be designed to resist lateral forces.... -
Post and lintel
Post and lintel, or in contemporary usage Post and beam, is a simple construction method using a lintel, header, or architrave as the horizontal member over a building void supported at its ends by two vertical columns, pillars, or posts. This architectural system and building method has been... -
Arch
An arch is a structure that spans a space and supports a load. Arches appeared as early as the 2nd millennium BC in Mesopotamian brick architecture and their systematic use started with the Ancient Romans who were the first to apply the technique to a wide range of structures. The arch is... -
Dome
A dome is a structural element of architecture that resembles the hollow upper half of a sphere. Dome structures made of various materials have a long architectural lineage extending into prehistory. Corbel domes and true domes have been found in the ancient Middle East in modest buildings and... -
Truss
In architecture and structural engineering, a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints referred to as nodes. External forces and reactions to those forces are considered to act only at the nodes and result in... -
Beam
A beam is a horizontal structural element that is capable of withstanding load primarily by resisting bending. The bending force induced into the material of the beam as a result of the external loads, own weight, span and external reactions to these loads is called a bending moment. Beams are... -
Tensile structure
A tensile structure is a construction of elements carrying only tension and no compression or bending. The term tensile should not be confused with tensegrity, which is a structural form with both tension and compression elements. Most tensile structures are supported by some form of compression or... -
Thin-shell structure
Thin-shell structures are light weight constructions using shell elements. These elements are typically curved and are assembled to large structures. Typical applications are fuselages of aeroplanes, boat hulls and roof structures in some buildings. A thin shell is defined as a shell with a...
